Daily Archives: November 23, 2012

A-BUS Universal Input Module

A-BUS Universal Input Module


Designed for use in any A-BUS distributed environment, this module provides line level input connection. This unit may be connected to the input of any A-BUS hub, to act as a standard source input. It may also be located in an individual zone, and connected between the output of the hub and a keypad, allowing connection of a local input source. This is perfect when a system contains a zone that occasionally has need to listen to an independent source. Device mounts in a single gang opening and is compatible with decora cover plates.

Live Gamer HD 1080p Video Capture Card PCI-Express

Live Gamer HD 1080p Video Capture Card PCI-Express


The Live Gamer HD is your best mate for tracking every in-game activity. It can capture your local PC gameplay without draining system resources. Now you don’t need to set up another PC just for recording game footages. With the Live Gamer HD, your game machine is also the gameplay library.

Sender 1X2 Splitter Active Vga To Cat5 Balun

Sender 1X2 Splitter Active Vga To Cat5 Balun


1X2 Active VGA To Cat5 BalunPart of a family of products that allows distribution of VGA video with stereo audio to multiple monitors. This model allows you send audio and video from a single source, to two separate monitors, each up to 1,000′ away, via Cat5 cable. Additionally, a feed through VGA output is provided, allowing connection of a third, local monitor. Note: Receivers required at each monitor are sold separately.

In Line Headphone Volume Control

In Line Headphone Volume Control


In-Line Headphone Volume ControlAdds convenience to any headphone that does not provide a local volume control. Simply plugs into the sound source and provides a 3.5mm jack for connecting existing headphones. Great for use with audio equipment with unusually high output levels, and for using low impedance headphones with devices designed for higher loads, such as airline in flight entertainment systems.

ECO 650VA Energy-saving 120V Standby UPS with Enhanced LCD interface

ECO 650VA Energy-saving 120V Standby UPS with Enhanced LCD interface


ECO series 650VA /325W UPS system with LCD display. Advanced LCD reports local power monitoring of UPS and site AC voltage levels along with estimated runtime, load percentage, load wattage, and battery charge level. Unit provides 8 NEMA 5-15R outlets with 3 of the surge-only providing energy-saving ECO functionality to reduce power usage.

Four Port USB Over Cat5e / Cat 6 Extender Balun

Four Port USB Over Cat5e / Cat 6 Extender Balun


This USB extender uses inexpensive network patch cable to extend the range of your USB peripherals. Plug a length of patch cable, up to 150′ long, between the local and remote sides. Your USB devices will appear as if they are connected directly to your PC. Place your Scanner, Webcam or Printer wherever you need it with this handy kit.

RS-232 Extender over CAT 5e cable

RS-232 Extender over CAT 5e cable


Extend the range of your serial RS-232 control interface with the convenience of standard Cat 5e cables. Compatible with all RS-232 protocols. Features Full-duplex data communication. Sends RS-232 data at 230 kbps up to 1000M / 3300 ft. Pure hardware solution – real time data transfer, no software conflicts. Transfer data or files between PCs, equipments. One CAT-5 cable extension. Package Contents RS232 Extender Local Unit RS232 Extender Remote Unit 1 user manual 2 power adapter DC 9V/300mA 1 20cm Null Modem cable (DB-9 Male to Male) *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

Automatic A/B Speaker Level Switch CTL02002

Automatic A/B Speaker Level Switch CTL02002


Automatic Speaker A/B Source SwitchThis switching device automatically selects between two stereo amplifiers to a single pair of speakers. It is perfect in situations where installed speakers are used with both a local stereo or home theater system, and a distributed audio system.Default Input–A is selected when no signal is present. When a signal is sensed at Input–B, the selector automatically switches to that input. A separate 12VDC, 100mA signal is also provided to trigger other external devices.

Three Channel RF Modulator – UHF 14~64 / CATV 65~125

Three Channel RF Modulator – UHF 14~64 / CATV 65~125


The Model 5435 Three-Channel Video Modulator converts three video and stereo audio inputs to three programmable TV channels (stereo audio is converted to monaural audio after modulation). The Model 5435 modulator offers video loop-through. Jumpers located on the back of the Model 5435 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a “Y” adapter to feed the video to a local monitor or VCR.